The moisture separator reheater (MSR) is of important significance to the nuclear power economy and turbine reliability. As the saturated steam entering into the HP cylinder expands and works, the steam pressure and temperature will down stage by stage, while its humidity rises. Two sets of MSR arewindows 7 professional serial number | download Windows 7 key | windows 7 ultimate product key | Windows ...
The pressure stabilizer is important equipment to control the primary line pressure and make overpressure protection. Its main function covers: pressure control is to control the pressure variation within the specified scope in the course of system operation; water level regulation is to make up RCP system’s the change of water volume serving as the buffering tank for primary line coolant; Overpressure ...
The chief function of 300MW nuclear unit steam generator is to serve as heat exchanger transferring the heat in primary line coolant to the feedwater of secondary line, enabling to generate saturated steam to drive the power unit in the secondary line. The coolant flowed from the reactor go through the hot pipe in primary line and enter into the inlet pipe of the lower gland of the steam generator ...
CPR1000 generation II improved type 1000MW grade pressurized water reactor nuclear technology is innovated on the basis of generation II nuclear technology with proprietary intellectual property right.CPR1000 nuclear reactor is use of vertical reversal U-shaped tube steam generator with natural circulation, and three steam generators are for each unit.
The high-temperature gas-cooled reactor is one reactor type with sound safety assurance widely recognized in the field of the international nuclear. It has perfect inherent safety, which will bring no harm to the public in the case of accident. Economically, it can compete with other power generation mode, as it has the merit of high power generation efficiency, single system structure and short construction ...
Non-dynamic residual heat removal exchanger is the equipment to discharge the AP1000 nuclear island non-dynamic residual heat. When there occurs non-LOCA accident, it is used to discharge the reactor core residual heat in emergency. Non-dynamic residual heat removal exchanger inlet piping is connected with RCS heat pipe, while its outlet piping connected with the cold chamber of the lower gland, constituting ...
Reactor core make-up water tank is one vertical cylindrical carbon steel vessel lined with stainless steel with hemispherical upper and lower glands, serving as the equipment to discharge the non-dynamic residual heat of AP1000 nuclear island. When there occurs non-LOCA accident, in case the normal make-up water is not available or insufficient, Reactor core make-up water tank will provide make-up ...
AP1000 nuclear series equipment is use of Generation III nuclear technology introduced from America Westinghouse Corporation.Steam generator is one of the main equipment for nuclear island, whose function is to make heat exchange between primary line coolant and secondary line feedwater, and transfer the nuclear reaction heat of the reactor core to the feedwater of the secondary line, and generate ...
Generation III Nuclear (CAP1400)1500MW turbine
Model: HN1251-5.38Type: single shaft, four-cylinder six exhaust steam, reaction condensing, with MSRThrough-flow stages: 80 stages (high pressure 2x10 stages, low pressure 3×2×10 stages)Rated rotating speed: 1500rpmLast blade height: 1375mm